Submission Preparation ChecklistAs part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in OpenOffice, Microsoft Word, or RTF document file format.
- Where available, URLs for the references have been provided.
- The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.
Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities –tacitly or explicitly –at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.
Authors should submit their manuscripts online. Electronic submission substantially reduces the editorial processing and reviewing times and shortens overall publication times. Please follow the hyperlink “Submit online” on the right and upload all of your manuscript files following the instructions given on the screen.
The following information should be included for online submission :
- Corresponding Author: full name
- Complete postal address where we can contact you while your article is being processed
- E-mail address, and phone and fax numbers where we can contact you
- Article title: the full title of your article
- Authors: full list of author and co-authors (Please note that no change will be possible in the sequence of the author (s) names and/or add/delete the name(s) after the decision of referee report, in any case.)
- Article type: Letters, Regular Research Article, Review, etc
- Abstract of your article
- Status of article: new, revised, resubmitted or accepted
- Classification scheme: Name of particular field
- A list of keywords for your article
- Permission to reproduce published material.
- Article file format: only .pdf file prepared using Word, LaTeX, etc.
- Number of figures/tables.
Instructions for a Special Issue
Please contact Editor before you would like to submit your proposal for a special issue. When submitting your proposal for a special issue, please include the following information:
- The names of the special issue editors with their short CV’s;
- The topic of the special issue;
- The name (s) of the author (s) of a particular article (s), and
- The abstracts (100-200 words) of the articles.
Contact for permissions
For permission to reproduce material elsewhere, please contact email@example.com
Length of the Paper
As such there is no limit to the length of regular articles. Article should include all possible technical details including tables, figures, notes and references.
Double-blind peer review. This journal follows a Double-blind reviewing procedure. Authors are therefore requested to submit:
A blinded manuscript without any author names and affiliations in the text page or in the title page. Self identifying citations and references in the article text should be avoided.
A separate title page, Containing title, all author's names affiliations, email and contact information of the corresponding author. Any acknowledgements, disclosures, or funding information should also be included on this page.
The title page should include:
- The name(s) of the author(s)
- A concise and informative title
- The affiliation(s) and address (es) of the author(s)
- The e-mail address, telephone number and fax number of the corresponding author
Manuscripts should include 100-300 word abstract. It should be informative and not only indicate the general scope of the article but also state the main result obtained and conclusions drawn. As the abstract is not part of the text it should be complete in itself.
Please provide 4-6 keywords for indexing purposes.
Manuscripts should be submitted in Word. Use a normal, plain font (e.g., 10-point Times Roman) for text. Use italics for emphasis. Use the automatic page numbering function to number the pages. Do not use field functions. Use tab stops or other commands for indents, not the space bar. Use the table function, not spreadsheets, to make tables. Use the equation editor or Math Type for equations. Save your file in doc format (Word 2007 or higher).
TeX and LaTeX
The text of article can be prepared in any common variant of TeX including LaTeX 2e, REVTeX, and Plain Tex. A style file for Preparing articles using LaTeX is also availabe for download.
Please use no more than three levels of displayed headings.
Abbreviations should be defined at first mention and used consistently thereafter.
Footnotes can be used to give additional information, which may include the citation of a reference included in the reference list. They should not consist solely of a reference citation, and they should never include the bibliographic details of a reference. They should also not contain any figures or tables.
Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data). Footnotes to the title or the authors of the article are not given reference symbols.
Always use footnotes instead of endnotes.
Acknowledgments of people, grants, funds, etc. should be placed in this section before the reference list and at the end of the text of a manuscript. The names of funding organizations/society should be written in full.
Cite references in the text by name and year in parentheses. Some Examples: Negotiations research spans many disciplines Thompson (1990).
This result was later contradicted by Becker and Seligman (1996).
This effect has been widely studied Abbott (1991); Barakat et al. (1995); Kelso and Smith (1998); Medvec et al. (1999).
2. Reference List
The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should only be mentioned in the text. Do not use footnotes or endnotes as a substitute for a reference list. Reference list entries should be alphabetized by the last names of the first Instructions for Authors author of each work.
3. Article from Journal
- Harris, M., Karper, E., Stacks, G., Hoffman, D., DeNiro, R., Cruz, P., et al.(2001). Writing labs and the Hollywood connection. Journal of Film Writing,44(3), 213–245.
4. Article by DOI
- Slifka, M. K., & Whitton, J. L. (2000) Clinical implications of dysregulated cytokine production. Journal of Molecular Medicine, doi:10.1007/s001090000086
- Calfee, R. C., & Valencia, R. R. (1991). APA guide to preparing manuscripts for journal publication. Washington, DC: American Psychological Associati
6. Book Chapter
- O’Neil, J. M., & Egan, J. (1992). Men’s and women’s gender role journeys:Metaphor for healing, transition, and transformation. In B. R. Wainrib (Ed.),Gender issues across the life cycle (pp. 107–123). New York: Chitkara.
7. Online Document
- Abou- Allaban, Y., Dell, M. L., Greenberg, W., Lomax, J., Peteet, J., Torres, M., & Cowell, V. (2006). Religious/spiritual commitments and psychiatric practice. Resource document. American Psychiatric Association. http://www.psych.org/edu/ot her_res/lib_archives/archives/200604.pdf. Accessed 25 June 2007.
All tables must be numbered using Arabic numerals. Tables should always be cited in text in consecutive numeral order. For each table, please supply a table caption (title) explaining the components of the table. Identify any previously published material by giving the original source in the form of a reference at the end of the table caption. Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.
Artwork and Illustrations Guidelines
For the best quality final product, it is highly recommended that you submit all of your artwork – photographs, line drawings, etc. – in an electronic format. Your art will then be produced to the highest standards with the greatest accuracy to detail. The published work will directly reflect the quality of the artwork provided. Electronic figure Submission Supply all figures electronically. Indicate what graphics program was used to create the artwork.For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MS Office files are also acceptable.Vector graphics containing fonts must have the fonts embedded in the files. Name your figure files with “Fig” and the figure number, e.g., Fig1.eps.
To add lettering, it is best to use Arial (sans serif fonts). Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt). Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label. Avoid effects such as shading, outline letters, etc. Do not include titles or captions within your illustrations.
All figures are to be numbered using Arabic numerals. Figures should always be cited in text in consecutive numerical order. Figure parts should be denoted by lowercase letters (a, b, c, etc.). If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures, “A1, A2, A3, etc.” Figures in online appendices (Electronic Supplementary Material) should, however, be numbered separately.
Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file. Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type. No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption. Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs. Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.
Figure Placement and Size
When preparing your figures, size figures to fit in the column width.For most journals the figures should be 39mm, 84 mm, 129 mm, or 174 mm wide and not higher than 234 mm. For books and book-sized journals, the figures should be 80 mm or 122 mm wide and not higher than 198 mm.
If you include figures that have already been published elsewhere you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Chitkara University Publication will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other open & free sources should be used.
In order to give people of all abilities and disabilities access to the content of your figures, please make sure that All figures have descriptive captions (blind users could then use text-to-speech softwaree or a text-to-Braille hardware) Patterns are used instead of or in addition to colors for conveying information (color-blind users would then be able to distinguish the visual elements). Any figure lettering has a contrast ratio of at least 4.5:1
Electronic Supplymentary Material
Chitkara accepts electronic multimedia files (animations, movies, audio, etc.)and other supplementary files to be published online along with an article or abook chapter. This feature can add dimension to the author’s article, as certaininformation cannot be printed or is more convenient in electronic form.
Supply all supplementary material in standard file formats.Please include in each file the following information: article title, journal name,author names; affiliation and e-mail addressof the corresponding author.To accommodate user downloads, please keep in mind that larger-sized filesmay require very long download times and that some users may experienceother problems during downloading.Audio, Video, and AnimationsAlways use MPEG-1 (.mpg) format.
Text and Presentations
Submit your material in PDF format; .doc or .ppt files are not suitable for long-term viability.A collection of figures may also be combined in a PDF file.
Spreadsheets should be converted to PDF if no interaction with the data isintended.If the readers should be encouraged to make their own calculations, spreadsheetsshould be submitted as .xls files (MS Excel).
Specialized format such as .pdb (chemical), .wrl (VRML), .nb (Mathematicanotebook), and .tex can also be supplied.
Collecting Multiple files
It is possible to collect multiple files in a .zip or .gz file.
If supplying any supplementary material, the text must make specific mentionof the material as a citation, similar to that of figures and tables.Refer to the supplementary files as “Online Resource”, e.g., “... as shown inthe animation (Online Resource 3)”, “... additional data are given in OnlineResource 4”.Name the files consecutively, e.g. “ESM_3.mpg”, “ESM_4.pdf”.
For each supplementary material, please supply a concise caption describingthe content of the file.Processing of supplementary filesElectronic supplementary material will be published as received from the author without any conversion, editing, or reformatting.
In order to give people of all abilities and disabilities access to the content ofyour supplementary files, please make sure thatThe manuscript contains a descriptive caption for each supplementary material Video files do not contain anything thatflashes more than three times persecond (so that users prone to seizures caused by such effects are not put atrisk)
Upon acceptance of your article you will receive a link to the special Author Query Application at Chitkara’s web page where you can sign the Copyright Transfer Statement online and indicate whether you wish to order Open Choice and offprints. Once the Author Query Application has been completed, your article will be processed and you will receive the proofs.
In addition to the normal publication process (whereby an article is submitted to the journal and access to that article is granted to customers who have purchased a subscription), Chitkara now provides an alternative publishing option Chitkara Open Choice. A Chitkara Open Choice article receives allthe benefits of a regular subscription-based article, but in addition is made available publicly through Chitkara’s online platform Chitkara Link.
Authors will be asked to transfer copyright of the article to the Publisher (orgrant the Publisher exclusive publication and dissemination rights). This will ensure the widest possible protection and dissemination of information under copyright laws.Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, the author(s) agree to publish the article under the Creative Commons Attribution License.
Offprints can be ordered by the corresponding author.
Publication of color illustrations is free of charge.
The purpose of the proof is to check for typesetting or conversion errors and the completeness and accuracy of the text, tables and figures. Substantial changes in content, e.g., new results, corrected values, titleand authorship, are not allowed without the approval of the Editor.After online publication, further changes can only be made in the form of an Erratum, which will be hyperlinked to the article.
The article will be published online after receipt of the corrected proofs. Thisis the official first publication citable with the DOI. After release of the printed version, the paper can also be cited by issue and page numbers.
Language of the Paper
The Research Paper must be in English language only.
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.